HX-DC furnace soot blower is mainly used to purge the soot and coking on the water wall of the boiler furnace. Its characteristics are as follows:
※Electric transmission and manual operation.
※Installation methods are flexible and diverse. 
※The adjustment of the number of soot blowing circles is simple and convenient. HX-DC(A) does not have this structure.
※The soot blowing pressure can be adjusted by changing the position of the pressure regulating plate.
※Soot blowing medium: superheated steam, compressed air.
※The unique flexible valve seat design does not affect the sealing effect due to temperature difference changes.
※HX-DC(A) uses a cam to hit the stroke switch operating lever. Only when the stroke is completed will there be signal feedback, making the equipment operation safer and more reliable.
Introduction of HX-DC soot blower structure
HX-DC soot blower is mainly composed of gooseneck valve, inner tube, soot blowing gun and nozzle, reduction transmission mechanism, support plate, guide rod, electrical control mechanism, and protective cover.

 
      
  
 
         
  
  
 
        
 
       
 
        
 
       
 
        
 
      






 Senior engineer
 Senior engineer 
 
         
         
         
        